support@dents-soft.com

CAD, Lab and Ortho

Viewers, CAD, slicers and orthodontic tools.

Licence Labels

Free, open-source and shareware marked on every page.

Official Sources

Versions checked against developer sites.

ideaMaker

ideaMaker

Free slicer from Raise3D (proprietary freeware) for most FFF 3D printers and Raise3D DF2/DF2+ DLP resin printers. Opens STL, 3MF, OBJ, STEP and IGES, exports G-code and DLP code. Windows 10 64-bit, macOS and Ubuntu. Version 5.5.3, checked 11 November 2026.

Need help installing it? Contact our team.

Free initial consultation and basic setup. Remote setup, phone, email or specialist visit. Remote training, conferences and briefings. Licensed software, quality work, on time.

See our installation services and price list →

FreeLatest version: 5.5.3Actively developed

ideaMaker is a free slicer made by Raise3D: it turns a 3D model into the toolpath file a printer follows. It works with most FFF (filament) printers and with Raise3D’s own DF2 and DF2+ DLP resin printers. The ideaMaker download is free from the Raise3D website; the program is proprietary freeware, not open source. Builds are published for Windows 10 64-bit, macOS (Intel and Apple Silicon) and Ubuntu Linux.

In a dental lab or a clinic with a printer, the usual jobs are study models, model bases, trays and holders. ideaMaker is a general 3D printing tool with no dental workflow of its own. It does not plan aligner treatment, segment teeth or design restorations; it only prepares models that were designed elsewhere for printing.

ideaMaker at a glance

ItemDetails
Latest version5.5.3 (21 October 2026), checked 11 November 2026
LicenceFree download, proprietary (Raise3D)
PlatformsWindows 10 64-bit, macOS 10.15 or later, Ubuntu 18.04 or later 64-bit
Installer sizeAbout 126 MB (Windows)
Input formatsSTL, 3MF, OBJ, STEP, IGES, OLTP
OutputG-code for FFF printers, DLP code for Raise3D DLP printers
Official websiteraise3d.com/ideamaker
Best forLabs with a Raise3D printer, or users who want one slicer for FFF and Raise3D DLP

What it does

  • Slices models for most FFF printers and for Raise3D DF2 and DF2+ DLP printers, with print, wash and cure templates for Raise3D resins.
  • Previews the toolpath with speed, layer height, extruder and structure type, so problems show up before printing.
  • Computes adaptive layer height, infill and supports to cut material use and print time.
  • Applies different settings to parts of a model: by group, by layer range or by volume.
  • Adds surface textures generated from greyscale images.
  • Imports print profiles for third-party materials from the ideaMaker Library inside the program.

How it differs from the other slicers on this site

OrcaSlicer, PrusaSlicer and UltiMaker Cura are open-source FDM slicers with large communities. ideaMaker is closed source, but it is the slicer Raise3D builds for its own printers and materials, and it is the only one of these that also prepares jobs for Raise3D’s DLP resin printers. If you do not own a Raise3D printer, an open-source slicer with a profile for your printer is usually the simpler choice.

Who should use it, and who should not

A good fit: a lab that runs Raise3D Pro, E or DF2 printers and wants the vendor’s tuned material profiles, or a user who wants per-layer and per-volume settings in a free slicer.

Not a fit: anyone looking for orthodontic planning or aligner software. ideaMaker does not plan tooth movement or stage aligners. It is also not a slicer for resin printers from other brands.

Installation notes

  1. Download the Windows installer from the Raise3D ideaMaker page or the “ideaMaker All Versions” page, which also keeps older releases.
  2. Run the installer on a 64-bit Windows 10 or later PC.
  3. On first start, choose your printer and material profiles; profiles for third-party materials can be imported from the ideaMaker Library.

Raise3D’s official system requirements table is written for its industrial printers and lists high-end hardware (for example, 64 GB of RAM as the minimum). We have not checked how ideaMaker runs on ordinary office PCs.

Limits and what we have not checked

Not tested yet: we have not installed or run this version. The facts above come from the official Raise3D ideaMaker page and its release list, checked on 11 November 2026. Some Raise3D cloud features need a Raise3D account; we have not checked which features, if any, ask you to sign in.

Sources: raise3d.com/ideamaker (features, file formats, system requirements) and raise3d.com/download/ideamaker-all-versions (version 5.5.3, released 21 October 2026).

FAQ

Is ideaMaker free?

Yes. Raise3D offers ideaMaker as a free download. It is proprietary software, not open source.

Does ideaMaker work only with Raise3D printers?

No. Raise3D says it is compatible with most FFF 3D printers. Its DLP resin support covers Raise3D’s own DF2 and DF2+ printers.

Which file formats can ideaMaker open?

STL, 3MF, OBJ, STEP, IGES and OLTP. It exports G-code for FFF printers and DLP code for Raise3D DLP printers.

Can ideaMaker plan orthodontic aligners?

No. It prepares models for printing. Aligner models must be designed in orthodontic software first and then sliced.

Last checked against official sources: 11 November 2026 (developer website: raise3d.com). Versions and licence terms change — confirm on the developer's site before deploying in a clinic.

Other programs

Contact our team

Our team handles software installation, setup and related IT tasks. We work with licensed software, deliver high-quality results and meet agreed deadlines.

  • Free initial consultation and basic setup.
  • Specialist visit on site, support by email or phone, or remote setup.
  • Remote training, plus participation in conferences and briefings.

Tell us about your company and leave a work email, and we will reply by email.