support@dents-soft.com

CAD, Lab and Ortho

Viewers, CAD, slicers and orthodontic tools.

Licence Labels

Free, open-source and shareware marked on every page.

Official Sources

Versions checked against developer sites.

ArchForm: Designing Clear Aligners In-House

This guide is for orthodontists, general dentists and dental technicians who want to design and make clear aligners in their own office instead of outsourcing every case. The short answer: in-house aligners need software that turns an intraoral scan into staged, printable tooth movements, plus a 3D printer and a thermoforming step. ArchForm is one of the better-known programs for this. It is not free, but the entry cost is low because you pay for exports as you use them. Not tested yet: we have not run these programs on patient cases. Versions and licence terms below were checked against the vendors’ own pages on 21 November 2026 (ArchForm Desktop App 2.7.2, OnyxCeph³ 3.2.244).

What an in-house aligner really needs

Making aligners yourself is a chain of steps, and the design program is only one link. You need a digital impression, a program to plan and stage the movements, a resin 3D printer to make the models, a thermoforming machine and sheet material, and a trimming and polishing step. The software’s job is the middle: import the scan, segment the teeth, move them to the target position, and split that movement into stages so each printed model is one aligner.

Three broad approaches exist. You can design aligners yourself in dedicated software and print them in-office; you can plan them in a wider orthodontic suite that also does cephalometrics and bracket work; or you can outsource the planning and manufacturing to a system such as Invisalign and only review the plan. The table below compares the programs we have verified for the first two routes.

The short list

ProgramBest forLicencePlatforms
ArchFormDesigning and printing aligners in-office, pay-per-exportShareware (conditionally free): free account and demo; exports use creditsWindows 10+, macOS 10.15+
OnyxCeph³A full 2D/3D ortho suite where aligners are one moduleShareware (conditionally free): unactivated install runs in a limited trial modeWindows 10/11 and Server; Mac via Boot Camp
Maestro 3D Ortho StudioSetups, attachments and aligner models with a free viewerShareware (conditionally free): free Viewer and one demo caseWindows 11, 64-bit
ClinCheckReviewing Invisalign plans that Align manufacturesShareware (Invisalign providers)Web and desktop app

Designing aligners in ArchForm

ArchForm from ArchForm, Inc. is a desktop program for Windows and macOS that syncs cases through a cloud Dashboard. It is built around the in-house aligner workflow: you import upper and lower scans as STL, the software orients them to the midline and occlusal plane, segments and labels each tooth, and aligns everything to a customisable arch form. From there you drag individual teeth, adjust torque and vertical position, set one-click IPR, and place attachments, bite stops, hooks and button cutouts. ArchForm then calculates how many aligners the movements need and prepares the models for printing, adding labels, hollowing, supports and trim lines automatically.

Besides aligners it also designs indirect bonding trays and direct-print aligners, and exports files for ArchForm’s own ArchMill trimming machine. The Dashboard lets you submit a case to ArchForm if you would rather have them do the alignment, the refinement or the manufacturing, so the same software covers both the fully in-house route and a hybrid one. The support site listed Desktop App 2.7.2 as the current build on 21 November 2026, and its user manual is dated 2 July 2026.

What is free and what costs money

ArchForm is shareware (conditionally free), and it is worth being precise about where the line sits. Creating an account and seeing a product demo costs nothing, and the desktop app is downloaded from inside the Dashboard. The paid part is exporting: printing a model or sending a case out uses ArchForm credits, billed as you use them. The rates are shown in the Dashboard or on request rather than on the public site, so budget for the exports, not the download. In practice the planning and design work can be explored at no cost; the cost starts when you produce something.

That model is different from the alternatives. OnyxCeph³ runs in a limited trial mode until you activate a paid licence, and Maestro 3D Ortho Studio offers a free Viewer and a single demo case before you need a production licence. None of the three is a genuinely free design tool; the free portions are for evaluation and for opening cases, not for treating patients.

When a full ortho suite fits better

ArchForm is focused. If your practice also needs cephalometric analysis, 2D image management, bracket positioning and model analysis in one database, a broader suite is the better home for aligners. OnyxCeph³ from Image Instruments is that kind of program: its current release is 3.2.244 “Spike” from 27 March 2026, it runs on a Windows client/server network, and its Aligner module builds staged models alongside cephalometrics, segmentation and indirect bonding. For model measurement specifically, 3Shape Ortho Analyzer handles Bolton, space and occlusion analyses, though it is commercial and sold through resellers only. We cover the measurement side in our guide to digital study models in orthodontics.

When to outsource instead

Not every practice should make aligners in-house. If you want the manufacturer to own the plan and the production, ClinCheck is the review tool for Invisalign: Align builds and ships the aligners, and you approve or adjust the proposed staging. You do not need a printer or a former, but you also do not control the cost per case or the turnaround. In-house design pays off when you run enough cases to justify the printer and materials, and when someone on the team is comfortable planning tooth movement. For a small number of cases a year, outsourcing is usually simpler.

From design to finished aligner

  1. Scan both arches and the bite, and export STL files. ArchForm lists 3Shape TRIOS and the Formlabs Form 3 among its validated equipment, and its support site has an iTero export guide.
  2. Import the scans, clean up the segmentation, run auto-alignment and fine-tune the movements, attachments and IPR. Check the stage count.
  3. Export the staged models. The software adds labels and supports; you slice them in your printer’s own software, such as Formlabs PreForm, CHITUBOX or Lychee Slicer.
  4. Print the models in dental resin, thermoform the aligner sheets over them, then trim and polish.

Limitations

  • None of these programs is free software. Exports and production always carry a cost, and the rates are not published on the vendors’ sites.
  • They are professional tools. ArchForm’s manual states that users need orthodontic training and dedicated training in the software; planning tooth movement is a clinical skill.
  • The software designs the models only. The 3D printer, resin, thermoforming machine and sheet material are separate purchases, and the design program does not replace the printer’s slicer.
  • A cloud account is needed for the Dashboard, downloads and case sync in ArchForm, and OnyxCeph³ needs a local server for multi-user work.

Which one should you use

  1. Decide the route first: fully in-house design, aligners inside a wider ortho suite, or outsourced manufacturing.
  2. For a focused in-house design tool with low entry cost, start with ArchForm’s free account and demo and test it with your own scans.
  3. If you need cephalometrics and bracket work in the same record, evaluate OnyxCeph³ in trial mode before committing.
  4. If you only want to review plans and let a manufacturer produce the aligners, use ClinCheck with Invisalign.

FAQ

What software do you need to design clear aligners in-house?

A program that imports intraoral scans, segments the teeth, plans the movements and exports staged models for printing. ArchForm, OnyxCeph³ and Maestro 3D Ortho Studio all do this; you also need a 3D printer and a thermoforming step.

Can you make clear aligners without Invisalign?

Yes. In-house aligners are designed in software such as ArchForm, printed on a resin printer and thermoformed in the office. Invisalign and its ClinCheck tool are one option, not the only one.

Do you need a 3D printer to use ArchForm?

To make aligners yourself, yes: ArchForm designs and exports the models, but a separate resin printer and thermoforming machine produce the physical aligners. You can also submit cases through the Dashboard for ArchForm to manufacture.

Is there free software for designing aligners?

Not fully. ArchForm, OnyxCeph³ and Maestro 3D all have free accounts, trial modes or viewers for evaluation, but exporting and production require a paid licence or credits.

How many aligners will the software plan?

ArchForm calculates the number from the planned movements and the staging you set, and reports it before you export. The count depends on the case, not on a fixed figure.

ArchForm or OnyxCeph for aligners?

ArchForm is a focused aligner design tool with pay-per-export pricing. OnyxCeph³ is a full orthodontic suite where aligners are one module among cephalometrics, analysis and bracket work. Choose ArchForm for aligners alone, OnyxCeph³ for an all-in-one ortho record.

Last updated: 21 November 2026 · Dents-Soft editorial team. Licence, version and platform details are checked against each developer's official documentation; none of the tools listed here should be treated as a certified medical device unless its vendor says so.

More Dental Software News

Contact our team

Our team handles software installation, setup and related IT tasks. We work with licensed software, deliver high-quality results and meet agreed deadlines.

  • Free initial consultation and basic setup.
  • Specialist visit on site, support by email or phone, or remote setup.
  • Remote training, plus participation in conferences and briefings.

Tell us about your company and leave a work email, and we will reply by email.